{"product_id":"fast-140-60020-34-temperature-probe-assembly-henny-penny","title":"FAST 140-60020-34 Temperature Probe Assembly for Henny Penny Pressure Fryer","description":"\u003ch2\u003eFAST 140-60020-34 Temperature Probe Assembly — Henny Penny Pressure Fryer\u003c\/h2\u003e\n\u003cp\u003eReplacement temperature probe assembly made by FAST (Foodservice Appliance Service Technology), specifically designed for Henny Penny electric commercial pressure fryers. This probe continuously monitors oil temperature inside the frying vat and feeds live readings to the fryer control board, keeping oil at the precise set cooking temperature throughout service.\u003c\/p\u003e\n\u003cp\u003eA failed or drifting probe is one of the most common causes of temperature-related faults on Henny Penny fryers — including error codes, oil temperature overshoot, undertemperature alarms, and inconsistent cooking results. Replacing the probe is a quick, cost-effective repair that restores full temperature accuracy.\u003c\/p\u003e\n\u003ch2\u003eIs This the Right Probe for Your Fryer?\u003c\/h2\u003e\n\u003cp\u003eThe FAST 140-60020-34 is a Henny Penny electric model probe assembly (HP ELEC designation). It is suited to Henny Penny electric pressure fryer models. Always verify against your fryer model number and serial number before ordering. If you are unsure, contact us with your model and serial number and we will confirm the correct probe for your machine before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCross Reference Numbers:\u003c\/strong\u003e FAS140-60020-34, FAST 140-60020-34, 14060002034\u003c\/p\u003e\n\u003ch2\u003eSymptoms of a Faulty Temperature Probe\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eError code or fault message on the fryer control panel display\u003c\/li\u003e\n\u003cli\u003eOil temperature not reaching or maintaining set point\u003c\/li\u003e\n\u003cli\u003eFryer overshoots cooking temperature — oil overheating\u003c\/li\u003e\n\u003cli\u003eIntermittent temperature fluctuations or erratic readings during service\u003c\/li\u003e\n\u003cli\u003eProbe wire visibly damaged, frayed, burnt or corroded\u003c\/li\u003e\n\u003cli\u003eOpen circuit on probe resistance test (multimeter reads OL\/infinite)\u003c\/li\u003e\n\u003cli\u003eFryer shuts down on high temperature limit during normal operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 140-60020-34\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e FAST (Foodservice Appliance Service Technology)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts Town Reference:\u003c\/strong\u003e FAS140-60020-34\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Temperature Probe Assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Henny Penny Electric Pressure Fryers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e 1 x probe assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible Fryer Models\u003c\/h2\u003e\n\u003cp\u003eDesigned for Henny Penny electric pressure fryer models. Verified compatible with: \u003cstrong\u003ePFE-500, PFE-561, PFE-580, PFE-581, PFE-591, PFE-600, PFE-680, PFE-682, CFA-500, CFA-600, Computron 7000, Computron 8000\u003c\/strong\u003e. Also used as a cross-reference replacement for Henny Penny part numbers: 14785, 14990, 14991, 14992, 14993, 14331.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eAlways switch off and isolate the fryer completely before replacing any probe. Allow oil to cool fully. Note probe routing, connector type and orientation before removal. After fitting, power on and verify temperature readings are accurate against a calibrated reference thermometer before returning the fryer to service. Installation should be carried out by a qualified catering engineer. Check the compression fitting or stuffing box seal for leaks after installation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFAST® is a brand of Welbilt Inc. Henny Penny® is a registered trademark of Henny Penny Corporation. LaunchCatering is not affiliated with or endorsed by either company. Part numbers are referenced for identification and compatibility purposes only.\u003c\/em\u003e\u003c\/p\u003e","brand":"Henny Penny","offers":[{"title":"Default","offer_id":57193289646412,"sku":"LC-140-60020-34","price":114.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4857\/7612\/files\/140-60020-34_Probe_Assembly_Henny_Penny.jpg?v=1775428188","url":"https:\/\/launchcatering.com\/products\/fast-140-60020-34-temperature-probe-assembly-henny-penny","provider":"LAUNCHCATERING LTD","version":"1.0","type":"link"}