{"product_id":"henny-penny-safety-relief-valve-15psi-59742","title":"Henny Penny Pressure Fryer Safety Relief Valve 1\/2\" 15 PSI (Part No. 59742)","description":"\u003cp\u003e\u003cstrong\u003e⚠️ SAFETY CRITICAL PART — This is a pressure safety relief valve. Always ensure the correct replacement is fitted and tested by a qualified engineer before returning the fryer to service.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eAbout This Part\u003c\/h2\u003e\u003cp\u003eThis is a replacement steam pressure safety relief valve for Henny Penny commercial pressure fryers. The safety relief valve is one of the most important components on a pressure fryer — it is designed to automatically release excess pressure from the frying vat if pressure exceeds the safe operating limit of 15 PSI, protecting both the equipment and kitchen staff.\u003c\/p\u003e\u003cp\u003eIf your fryer is venting steam unexpectedly, leaking from the relief valve, or if the valve fails to hold pressure at the correct set point, the valve should be inspected and replaced. A faulty relief valve is a safety hazard and the fryer must not be operated until a replacement is fitted.\u003c\/p\u003e\u003ch2\u003eUniversal Fit — No Country Variant Required\u003c\/h2\u003e\u003cp\u003eUnlike the solenoid valve which has 50Hz\/60Hz variants, this is a \u003cstrong\u003epurely mechanical valve\u003c\/strong\u003e with no electrical components. It is suitable for all markets worldwide — UK, Europe, USA, Australia and beyond. One part fits all.\u003c\/p\u003e\u003ch2\u003eFits Models\u003c\/h2\u003e\u003cp\u003eCompatible with Henny Penny Pressure Fryer models: \u003cstrong\u003e500, PFE-500, 561, PFE-561, 580, PFE-580, 581, PFE-581, 600, PFE-600, 680, PFE-680\u003c\/strong\u003e — both gas and electric variants, single phase and three phase.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 59742\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Steam Pressure Safety Relief Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Size:\u003c\/strong\u003e 1\/2\" NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Pressure:\u003c\/strong\u003e 15 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial \/ Finish:\u003c\/strong\u003e Polished Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e L 3.75\" x W 4.0\" x H 1.0\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.12 lbs \/ 0.51 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical:\u003c\/strong\u003e None — purely mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry Variant:\u003c\/strong\u003e Universal — fits all markets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhen to Replace\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eValve is leaking or venting steam during normal operation\u003c\/li\u003e\n\u003cli\u003eFryer is not building pressure to the correct level\u003c\/li\u003e\n\u003cli\u003eValve is visibly damaged, corroded or seized\u003c\/li\u003e\n\u003cli\u003eAs part of planned annual maintenance inspection\u003c\/li\u003e\n\u003cli\u003eAfter any overpressure event\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eAlways disconnect power and allow the fryer to cool completely before replacing. Drain the frying vat fully before removal. Apply appropriate thread sealant to the 1\/2\" NPT threads. Do not overtighten. After fitting, test the fryer at operating pressure and inspect for leaks before returning to service. Installation should be carried out by a qualified catering engineer.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis is an aftermarket replacement part designed for compatibility with the above Henny Penny pressure fryer models. Henny Penny® is a registered trademark of Henny Penny Corporation. This listing is not affiliated with or endorsed by Henny Penny Corporation.\u003c\/em\u003e\u003c\/p\u003e","brand":"Henny Penny","offers":[{"title":"Default","offer_id":57191258849612,"sku":"LC-59742","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4857\/7612\/files\/Henny_Penny_Relief_Valve_59742_10.jpg?v=1775403760","url":"https:\/\/launchcatering.com\/products\/henny-penny-safety-relief-valve-15psi-59742","provider":"LAUNCHCATERING LTD","version":"1.0","type":"link"}