{"product_id":"henny-penny-solenoid-valve-repair-kit-17120","title":"Henny Penny Pressure Fryer Solenoid Valve Repair Kit (Part No. 17120)","description":"\u003ch2\u003eAbout This Kit\u003c\/h2\u003e\u003cp\u003eThis is a complete solenoid valve repair kit for Henny Penny commercial pressure fryers. If your solenoid valve is leaking pressure or failing to hold pressure during the cook cycle, a worn or nicked Teflon seal is often the cause — and this kit allows you to restore the valve to full working order without replacing the entire valve assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis is a universal kit\u003c\/strong\u003e — it is compatible with all Henny Penny solenoid valve variants: 18721, 18724, 29515 and 29698. No country or voltage selection required. One kit fits all.\u003c\/p\u003e\u003ch2\u003eWhat is Included in the Kit\u003c\/h2\u003e\u003cp\u003eThe kit contains all internal seals and components required for a complete valve overhaul:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRetainer clip (17101)\u003c\/li\u003e\n\u003cli\u003eRetainer spring (17109)\u003c\/li\u003e\n\u003cli\u003eCore spring (17110)\u003c\/li\u003e\n\u003cli\u003eDisc assembly core (17111)\u003c\/li\u003e\n\u003cli\u003eBonnet gasket (17112)\u003c\/li\u003e\n\u003cli\u003eSeat, Teflon (17114)\u003c\/li\u003e\n\u003cli\u003eDisc spring guide (17115)\u003c\/li\u003e\n\u003cli\u003eDisc spring (17116)\u003c\/li\u003e\n\u003cli\u003eRetainer spring ring (17117)\u003c\/li\u003e\n\u003cli\u003eO-ring seal seat (17122)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e If any one seal is defective, all seals should be replaced. Do not replace individual seals only — always fit the complete kit.\u003c\/p\u003e\u003ch2\u003eWhen to Use This Kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFryer is not building pressure during the cook cycle\u003c\/li\u003e\n\u003cli\u003ePressure is dropping or leaking during cooking\u003c\/li\u003e\n\u003cli\u003eSolenoid valve is making hissing or leaking sounds\u003c\/li\u003e\n\u003cli\u003eTeflon seat is visibly nicked, worn or damaged\u003c\/li\u003e\n\u003cli\u003eRoutine planned maintenance overhaul of the solenoid valve\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFits Models\u003c\/h2\u003e\u003cp\u003eCompatible with all Henny Penny Pressure Fryer models that use the standard solenoid valve assembly: \u003cstrong\u003ePFE-500, PFE-561, PFE-580, PFE-581, PFE-582, PFE-591, PFE-600, PFE-680, PFE-682, CFA-500, CFA-600, Computron 7000, Computron 8000, PFG-500, PFG-561, PFG-600, PFG-691, MP-944, 500 series, 600 series\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eWorks with valve part numbers: \u003cstrong\u003e18721, 18724, 29515, 29698\u003c\/strong\u003e — all variants, all voltages, all markets.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 17120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e 10 internal seal and spring components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Compatibility:\u003c\/strong\u003e 18721 \/ 18724 \/ 29515 \/ 29698\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e L 5.25\" x W 4.0\" x H 2.0\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.50 lbs \/ 0.23 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eThe solenoid body must be removed from the fryer to replace the seals. Always disconnect power before starting. Remove the two adapter screws attaching the pipe adapter to the solenoid body, then remove the disc spring, guide and seat. Clean the valve body thoroughly. Wet the O-ring around the seal with water and insert the O-ring assembly flat side first through the IN side of the body. Use a pencil eraser to press the Teflon seal in until it snaps into place — do not nick or mark the seal as even the smallest nick will cause a pressure leak. Replace all O-ring seals and reassemble the valve.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis is an aftermarket replacement part designed for compatibility with the above Henny Penny pressure fryer models. Henny Penny® is a registered trademark of Henny Penny Corporation. This listing is not affiliated with or endorsed by Henny Penny Corporation.\u003c\/em\u003e\u003c\/p\u003e","brand":"Henny Penny","offers":[{"title":"Default","offer_id":57187263185228,"sku":"LC-17120","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4857\/7612\/files\/Henny_Penny_Pressure_Fryer_Solenoid_Valve_Repair_Kit_Part_No._17120.jpg?v=1775347212","url":"https:\/\/launchcatering.com\/products\/henny-penny-solenoid-valve-repair-kit-17120","provider":"LAUNCHCATERING LTD","version":"1.0","type":"link"}