3/4 inch x 1/2 inch Black Iron Reducing Socket - BSP Gas Pipe Fitting for Commercial Catering
3/4 inch x 1/2 inch Black Iron Reducing Socket - BSP Gas Pipe Fitting for Commercial Catering
Description
This 3/4 inch x 1/2 inch black iron reducing socket is a black malleable iron BSP reducing fitting for commercial catering gas installation pipework. It joins two different pipe sizes in a straight run, with a larger female thread at one end and a smaller female thread at the other. Supplied in a female / female (reducing) configuration, reducing from 3/4 inch to 1/2 inch.
Technical Specifications
Fitting Data
| Specification | Detail |
|---|---|
| Type | Reducing Socket |
| Size | 3/4 inch x 1/2 inch BSP |
| Thread Configuration | Female / Female (reducing) |
| Reduces From / To | 3/4 inch to 1/2 inch |
| Material | Black malleable iron |
| Thread Standard | BSP (British Standard Pipe) |
| Application | Commercial catering gas installation pipework |
| Supplier Reference | LC-GPF23 |
| Condition | New |
Fitment
A standard black iron BSP reducing fitting. Confirm the 3/4 inch and 1/2 inch thread sizes and the female / female (reducing) configuration against the pipework you are joining before ordering. If in doubt, contact us with your requirement and we will confirm the right fitting.
Gas Safety
What Is Included
- 1 x 3/4 inch x 1/2 inch black iron reducing socket
Jointing compound, sealant and pipework are not included.
Frequently Asked Questions
What sizes does this reducing fitting connect?
It reduces between 3/4 inch BSP and 1/2 inch BSP, in a female / female (reducing) configuration. Match both thread sizes to the pipework you are joining before ordering.
What is this fitting used for?
A black iron reducing socket joins two different pipe sizes in a straight run, with a larger female thread at one end and a smaller female thread at the other. It is used in commercial catering gas installation pipework where two different pipe sizes meet.
What material is it?
Black malleable iron, the standard material for threaded gas pipework fittings.
Is it suitable for gas pipework?
Yes. It is a black iron fitting for gas installation pipework. All gas pipework must be installed and tested by a Gas Safe registered engineer.
Is jointing compound included?
No. Thread sealant or jointing compound suitable for gas is not included and should be selected and applied by the installing engineer.
Why LaunchCatering
Stocked in the UK and matched by specification. We list both thread sizes, the standard and the configuration so you order the right reducing fitting first time. A trusted supplier of commercial catering gas installation parts.
Fitment guidance is provided for reference only. Confirm both thread sizes and the configuration against the pipework you are joining before ordering.
No technical specifications available for this product.
