Henny Penny 16624 Red Indicator Light 250V 3W for 500 600 Series Fryers and HC-900 Holding Cabinets
Henny Penny 16624 Red Indicator Light 250V 3W for 500 600 Series Fryers and HC-900 Holding Cabinets
Description
The Henny Penny 16624 is a red indicator light rated 250V 3W that shows when the appliance heating circuit is live. It fits Henny Penny 500 and 600 series fryers plus HC-900 and HCH-932 holding cabinets. Supplied from UK stock by LaunchCatering.
Specifications
Technical Data
| Manufacturer | Henny Penny |
| Part Number | 16624 |
| Type | Indicator light, red lens |
| Voltage | 250V |
| Power | 3W |
| Lens Colour | Red |
| Condition | New |
| Supplied Without | Wiring and connectors |
Part Number Cross-Reference
| Reference | Part Number |
|---|---|
| Manufacturer part number | 16624 |
| Alternative reference | HEN16624 |
| Alternative reference | 38-1208 |
Compatible Equipment Models
| Brand | Equipment Type | Model Numbers |
|---|---|---|
| Henny Penny | Pressure and Open Fryers | 500, 600 series - verify against part 16624 |
| Henny Penny | Holding Cabinets | HC-900, HCH-932 |
Always verify the part number against your equipment data plate before ordering. Installation must be carried out by a suitably qualified engineer.
What Is Included
- 1 x Henny Penny 16624 red indicator light 250V 3W
Not included: wiring, connectors or fixings
Frequently Asked Questions
Will the Henny Penny 16624 fit my machine?
This part is compatible with Henny Penny 500 and 600 series fryers and HC-900 / HCH-932 holding cabinets. Check the part number on your existing component or your equipment data plate, or send us your model and serial number and we will confirm the fit before you order.
What are the cross-reference part numbers?
The main reference is Henny Penny 16624. It also appears under alternative references such as HEN16624, 38-1208. If your paperwork shows any of these numbers, this is the matching part.
How do I replace this part?
Isolate the appliance from the electrical supply before any work begins. Disconnect the spade terminals from the old lamp, release it from the panel cut-out, clip in the new lamp and reconnect the terminals. Installation must be carried out by a suitably qualified engineer.
Is this a manufacturer-specification part?
Yes. This part is supplied to the Henny Penny specification for part number 16624, matched by rating and dimensions, so it fits and performs as the component it replaces.
Is this part safe to use in commercial equipment?
Yes, when correctly installed it meets the specification required for Henny Penny fryers and holding cabinets. It must be fitted by a suitably qualified engineer and the appliance tested before returning to service.
Why LaunchCatering
LaunchCatering is a trusted UK supplier of commercial catering equipment spare parts. Every listing is checked against manufacturer part numbers and compatibility data, and our parts are held in UK stock. If you are unsure whether this part fits your machine, contact us with your model and serial number and we will verify it before you order.
No technical specifications available for this product.
