Henny Penny 18233-2 Fryer Heating Element Kit 230V 4500W for 500 561 and OE Series
Henny Penny 18233-2 Fryer Heating Element Kit 230V 4500W for 500 561 and OE Series
Description
The Henny Penny 18233-2 is a complete fryer heating element kit rated 230V 4500W, measuring approximately 311 x 432mm with a 5/8in-18 threaded mount. It fits Henny Penny 500, 561, OE-100 and OE 301, 302 and 303 fryers. Supplied from UK stock by LaunchCatering.
Specifications
Technical Data
| Manufacturer | Henny Penny |
| Part Number | 18233-2 |
| Type | Fryer heating element kit |
| Voltage | 230V |
| Power | 4500W (4.5kW) |
| Dimensions | Approx 311 x 432mm (12.25 x 17 inch) |
| Mount | 5/8in-18 thread |
| Condition | New |
| Supplied Without | Wiring |
Part Number Cross-Reference
| Reference | Part Number |
|---|---|
| Manufacturer part number | 18233-2 |
| Alternative reference | HEN18233-2 |
Compatible Equipment Models
| Brand | Equipment Type | Model Numbers |
|---|---|---|
| Henny Penny | Pressure and Open Fryers | 500, 561, OE-100, OE 301, OE 302, OE 303 |
Always verify the part number against your equipment data plate before ordering. Installation must be carried out by a suitably qualified engineer.
What Is Included
- 1 x Henny Penny 18233-2 heating element kit 230V 4500W with fitting hardware as supplied by the manufacturer
Not included: wiring
Frequently Asked Questions
Will the Henny Penny 18233-2 fit my machine?
This part is compatible with Henny Penny 500, 561, OE-100 and OE 301, 302 and 303 fryers. Check the part number on your existing component or your equipment data plate, or send us your model and serial number and we will confirm the fit before you order.
What are the cross-reference part numbers?
The main reference is Henny Penny 18233-2. It also appears under alternative references such as HEN18233-2. If your paperwork shows any of these numbers, this is the matching part.
How do I replace this part?
Isolate the appliance from the electrical supply before any work begins. Drain the frypot and isolate the fryer, disconnect the element leads, release the threaded mount, fit the new element with new seals where supplied and torque to specification. Installation must be carried out by a suitably qualified engineer.
Is this a manufacturer-specification part?
Yes. This part is supplied to the Henny Penny specification for part number 18233-2, matched by rating and dimensions, so it fits and performs as the component it replaces.
Is this part safe to use in commercial equipment?
Yes, when correctly installed it meets the specification required for Henny Penny electric fryers. It must be fitted by a suitably qualified engineer and the appliance tested before returning to service.
Why LaunchCatering
LaunchCatering is a trusted UK supplier of commercial catering equipment spare parts. Every listing is checked against manufacturer part numbers and compatibility data, and our parts are held in UK stock. If you are unsure whether this part fits your machine, contact us with your model and serial number and we will verify it before you order.
No technical specifications available for this product.
