Henny Penny 29509 Contactor 3 Pole 40-50A 24V Coil for 500 561 600 Fryers
Henny Penny 29509 Contactor 3 Pole 40-50A 24V Coil for 500 561 600 Fryers
Description
The Henny Penny 29509 is a 3-pole contactor rated 40A inductive and 50A resistive with a 24V coil, switching power to the heating circuit. It fits Henny Penny 500, 561 and 600 series fryers. Non-mercury design, supplied from UK stock by LaunchCatering.
Specifications
Technical Data
| Manufacturer | Henny Penny |
| Part Number | 29509 |
| Type | Contactor, 3 pole, non-mercury |
| Coil Voltage | 24V AC |
| Rating | 40A inductive / 50A resistive |
| Condition | New |
| Supplied Without | Mounting hardware and wiring |
Part Number Cross-Reference
| Reference | Part Number |
|---|---|
| Manufacturer part number | 29509 |
| Alternative reference | HEN29509 |
| Alternative reference | 44-1102 |
Compatible Equipment Models
| Brand | Equipment Type | Model Numbers |
|---|---|---|
| Henny Penny | Pressure and Open Fryers | 500, 561, 600 - verify against part 29509 |
Always verify the part number against your equipment data plate before ordering. Installation must be carried out by a suitably qualified engineer.
What Is Included
- 1 x Henny Penny 29509 contactor, 3 pole, 24V coil
Not included: mounting hardware and wiring
Frequently Asked Questions
Will the Henny Penny 29509 fit my machine?
This part is compatible with Henny Penny 500, 561 and 600 series fryers. Check the part number on your existing component or your equipment data plate, or send us your model and serial number and we will confirm the fit before you order.
What are the cross-reference part numbers?
The main reference is Henny Penny 29509. It also appears under alternative references such as HEN29509, 44-1102. If your paperwork shows any of these numbers, this is the matching part.
How do I replace this part?
Isolate the appliance from the electrical supply before any work begins. Isolate the fryer, photograph the wiring, transfer the leads to the new contactor one at a time and secure it on the existing mounting. Installation must be carried out by a suitably qualified engineer.
Is this a manufacturer-specification part?
Yes. This part is supplied to the Henny Penny specification for part number 29509, matched by rating and dimensions, so it fits and performs as the component it replaces.
Is this part safe to use in commercial equipment?
Yes, when correctly installed it meets the specification required for Henny Penny electric fryers. It must be fitted by a suitably qualified engineer and the appliance tested before returning to service.
Why LaunchCatering
LaunchCatering is a trusted UK supplier of commercial catering equipment spare parts. Every listing is checked against manufacturer part numbers and compatibility data, and our parts are held in UK stock. If you are unsure whether this part fits your machine, contact us with your model and serial number and we will verify it before you order.
No technical specifications available for this product.
