Henny Penny 67627 Heating Element 240V 1500W for HC-900 and HHC-900 Series Holding Cabinets
Henny Penny 67627 Heating Element 240V 1500W for HC-900 and HHC-900 Series Holding Cabinets
Description
The Henny Penny 67627 is a coil heating element rated 240V 1500W that maintains holding temperature in heated cabinets. It fits Henny Penny HC-900, HHC-900, HHC-902, HHC-903, HHC-906 and HHC-908 holding cabinets. Supplied from UK stock by LaunchCatering.
Specifications
Technical Data
| Manufacturer | Henny Penny |
| Part Number | 67627 |
| Type | Heating element, coil |
| Voltage | 240V |
| Power | 1500W |
| Condition | New |
| Supplied Without | Wiring and fixings |
Part Number Cross-Reference
| Reference | Part Number |
|---|---|
| Manufacturer part number | 67627 |
| Alternative reference | HEN67627 |
| Alternative reference | 342089 |
Compatible Equipment Models
| Brand | Equipment Type | Model Numbers |
|---|---|---|
| Henny Penny | Heated Holding Cabinets | HC-900, HHC-900, HHC-902, HHC-903, HHC-906, HHC-908 |
Always verify the part number against your equipment data plate before ordering. Installation must be carried out by a suitably qualified engineer.
What Is Included
- 1 x Henny Penny 67627 heating element 240V 1500W
Not included: wiring and fixings
Frequently Asked Questions
Will the Henny Penny 67627 fit my machine?
This part is compatible with Henny Penny HC-900, HHC-900, HHC-902, HHC-903, HHC-906 and HHC-908 holding cabinets. Check the part number on your existing component or your equipment data plate, or send us your model and serial number and we will confirm the fit before you order.
What are the cross-reference part numbers?
The main reference is Henny Penny 67627. It also appears under alternative references such as HEN67627, 342089. If your paperwork shows any of these numbers, this is the matching part.
How do I replace this part?
Isolate the appliance from the electrical supply before any work begins. Isolate the cabinet, remove the element cover panel, disconnect the element leads, swap the element and refit in reverse order. Installation must be carried out by a suitably qualified engineer.
Is this a manufacturer-specification part?
Yes. This part is supplied to the Henny Penny specification for part number 67627, matched by rating and dimensions, so it fits and performs as the component it replaces.
Is this part safe to use in commercial equipment?
Yes, when correctly installed it meets the specification required for Henny Penny heated holding cabinets. It must be fitted by a suitably qualified engineer and the appliance tested before returning to service.
Why LaunchCatering
LaunchCatering is a trusted UK supplier of commercial catering equipment spare parts. Every listing is checked against manufacturer part numbers and compatibility data, and our parts are held in UK stock. If you are unsure whether this part fits your machine, contact us with your model and serial number and we will verify it before you order.
No technical specifications available for this product.
