Henny Penny 93968 Hi-Limit Single Thermocouple — CFE-415 (Before Dec 2020)
Henny Penny 93968 Hi-Limit Single Thermocouple — CFE-415 (Before Dec 2020)
Henny Penny 93968 High-Limit Single Thermocouple — CFE-415 Series
Genuine replacement high-limit thermocouple for the Henny Penny CFE-415 open fryer series. This is the single thermocouple version (Part No. 93968), fitted as standard on all CFE-415 fryers manufactured BEFORE December 2020.
The high-limit thermocouple is a safety-critical component. It monitors oil temperature independently of the main temperature control probe. If the oil temperature rises above the safe maximum threshold, the thermocouple triggers an automatic shutdown of the heating element — protecting the fryer, the kitchen, and staff from a dangerous overheat event.
Note: Each CFE-415 fryer requires 2 thermocouples (Qty: 2 per fryer). This listing is for 1 thermocouple. Order 2 if replacing the full set.
⚠ Which Thermocouple Do I Need?
This is the most important question before ordering. Henny Penny changed the thermocouple design on the CFE-415 series in December 2020. The two versions are NOT interchangeable — you must match the part to your fryer build date.
| Part No. | Type | Fryer Build Date | Price |
|---|---|---|---|
| 93968 | Single Thermocouple | BEFORE December 2020 | £129.99 |
| 156986 | Dual Thermocouple | AFTER December 2020 | £129.99 |
How to find your build date: Check the silver data plate on the back or side of the fryer. It shows the manufacture date and serial number. If unsure, contact us with your serial number and we will confirm the correct part before you order.
Specifications
| Part Number | 93968 |
| Parts Town Ref | HEN93968 |
| Type | High-Limit Single Thermocouple |
| Fryer Build Date | BEFORE December 2020 only |
| Qty Per Fryer | 2 thermocouples per fryer |
| Dimensions | H 9" x W 6" x L 5" |
| Function | Safety high-limit — shuts down heating if oil overheats |
| Superseded By | 156986 (dual thermocouple — for fryers after Dec 2020) |
| Condition | New — Genuine OEM |
| Stocking Level | Level A — Truck Stock (high demand) |
Compatible Models
Henny Penny CFE-415 Series open fryers — units manufactured before December 2020. Also cross-references with earlier Henny Penny open fryer models using the single hi-limit thermocouple configuration. Verify against your fryer data plate and service manual before ordering.
Symptoms of a Failed Hi-Limit Thermocouple
- Fryer shuts down unexpectedly during normal operation
- Hi-limit error code or fault displayed on the control panel
- Fryer will not heat up — no fault code but element does not activate
- Thermocouple reads open circuit on resistance test
- Visible damage, burning or corrosion on the thermocouple body or leads
- Fryer trips on overheat even when oil temperature is within normal range
Market Comparison
- Parts Town USA: $262.50 (~£208) per unit
- Walmart USA: $307.33 (~£243) per unit
- Amazon USA: $307–$347 (~£243–£274) per unit
- LaunchCatering UK: £129.99 — fast UK dispatch, no import costs
Installation Notes
Always isolate and switch off the fryer completely before replacing any thermocouple. Allow the oil to cool fully. Note the thermocouple routing and connector orientation before removal. After fitting, power on and verify correct operation before returning to service. Installation must be carried out by a qualified catering engineer. Remember: 2 thermocouples are required per CFE-415 fryer — check both before service.
Henny Penny® is a registered trademark of Henny Penny Corporation. LaunchCatering is not affiliated with or endorsed by Henny Penny Corporation. Part numbers are referenced for identification and compatibility purposes only.
No technical specifications available for this product.
