Easycut Gas Valve Flame Failure Device Rear Magnet FFD FFV
Easycut Gas Valve Flame Failure Device Rear Magnet FFD FFV
Out of stock — Browse compatible gas valves
Description
A direct replacement rear magnet for Easycut gas valve taps fitted with a flame failure device (FFD / FFV). The magnet holds the gas valve open once the thermocouple heats up; if it fails, the pilot light will not stay lit. Also compatible with PEL20/21, Junkers CH110 and EGA 25213 gas valves. Check the dimensions before ordering. Installation must be carried out by a Gas Safe registered engineer.
Specifications
Technical Data
| Compatible brand | Easycut |
| Part type | Gas valve rear magnet (flame failure device) |
| Total length | 44mm |
| Junction head diameter | 15.5mm |
| Valve seat gasket diameter | 11.5mm |
| Compatible valves | PEL20/21, Junkers CH110, EGA 25213 |
| Application | Easycut gas valve tap - FFD / FFV type |
| Condition | New |
| Compatible brands | Easycut |
Compatible Equipment Models
| Brand | Equipment Type | Models |
|---|---|---|
| Easycut | Gas doner kebab machine (FFD / FFV gas valve tap) | Verify magnet dimensions and valve type before ordering |
Included: 1 x gas valve rear magnet
Gas safety: installation must be carried out by a Gas Safe registered engineer.
Product Summary
The LC-KMPEC19 is a rear magnet for Easycut gas valve taps fitted with a flame failure device (FFD / FFV), holding the valve open once the thermocouple generates current. It measures 44mm long with a 15.5mm junction head and also fits PEL20/21, Junkers CH110 and EGA 25213 valves. Supplied new by LaunchCatering, a UK supplier of commercial catering spare parts. Installation must be carried out by a Gas Safe registered engineer.
Frequently Asked Questions
Will this fit my Easycut machine?
It suits Easycut gas doner kebab machines with an FFD / FFV gas valve tap, and valves including PEL20/21, Junkers CH110 and EGA 25213. Check the magnet dimensions against your valve before ordering.
What does the rear magnet do?
It is the electromagnetic part inside the flame failure device. When the thermocouple heats up it energises the magnet, holding the gas valve open. If it weakens, the pilot will not stay lit.
What are the dimensions?
Total length 44mm, junction head diameter 15.5mm, valve seat gasket diameter 11.5mm.
Which valves is it compatible with?
Easycut FFD / FFV gas valve taps, plus PEL20/21, Junkers CH110 and EGA 25213.
Can I fit this myself?
This part should only be fitted by a Gas Safe registered engineer. Incorrect installation of gas components can be dangerous.
No technical specifications available for this product.
