FAST 140-60020-34 Temperature Probe Assembly — Henny Penny Pressure Fryer

Replacement temperature probe assembly made by FAST (Foodservice Appliance Service Technology), specifically designed for Henny Penny electric commercial pressure fryers. This probe continuously monitors oil temperature inside the frying vat and feeds live readings to the fryer control board, keeping oil at the precise set cooking temperature throughout service.

A failed or drifting probe is one of the most common causes of temperature-related faults on Henny Penny fryers — including error codes, oil temperature overshoot, undertemperature alarms, and inconsistent cooking results. Replacing the probe is a quick, cost-effective repair that restores full temperature accuracy.

Is This the Right Probe for Your Fryer?

The FAST 140-60020-34 is a Henny Penny electric model probe assembly (HP ELEC designation). It is suited to Henny Penny electric pressure fryer models. Always verify against your fryer model number and serial number before ordering. If you are unsure, contact us with your model and serial number and we will confirm the correct probe for your machine before you order.

Cross Reference Numbers: FAS140-60020-34, FAST 140-60020-34, 14060002034

Symptoms of a Faulty Temperature Probe

• Error code or fault message on the fryer control panel display
• Oil temperature not reaching or maintaining set point
• Fryer overshoots cooking temperature — oil overheating
• Intermittent temperature fluctuations or erratic readings during service
• Probe wire visibly damaged, frayed, burnt or corroded
• Open circuit on probe resistance test (multimeter reads OL/infinite)
• Fryer shuts down on high temperature limit during normal operation

Product Specifications

• Part Number: 140-60020-34
• Manufacturer: FAST (Foodservice Appliance Service Technology)
• Parts Town Reference: FAS140-60020-34
• Type: Temperature Probe Assembly
• Application: Henny Penny Electric Pressure Fryers
• Condition: New
• Sold as: 1 x probe assembly

Compatible Fryer Models

Designed for Henny Penny electric pressure fryer models. Verified compatible with: PFE-500, PFE-561, PFE-580, PFE-581, PFE-591, PFE-600, PFE-680, PFE-682, CFA-500, CFA-600, Computron 7000, Computron 8000. Also used as a cross-reference replacement for Henny Penny part numbers: 14785, 14990, 14991, 14992, 14993, 14331.

Installation Notes

Always switch off and isolate the fryer completely before replacing any probe. Allow oil to cool fully. Note probe routing, connector type and orientation before removal. After fitting, power on and verify temperature readings are accurate against a calibrated reference thermometer before returning the fryer to service. Installation should be carried out by a qualified catering engineer. Check the compression fitting or stuffing box seal for leaks after installation.

FAST® is a brand of Welbilt Inc. Henny Penny® is a registered trademark of Henny Penny Corporation. LaunchCatering is not affiliated with or endorsed by either company. Part numbers are referenced for identification and compatibility purposes only.

No technical specifications available for this product.