Henny Penny 22648 Strip Heater Element 230V 1020W for CW-114 CW-216 and HCW Warmers
Henny Penny 22648 Strip Heater Element 230V 1020W for CW-114 CW-216 and HCW Warmers
Description
The Henny Penny 22648 is a strip heater element rated 230V 1020W, measuring approximately 648 x 76mm, that keeps displayed food at serving temperature. It fits Henny Penny CW-114 and CW-216 warmers and the HCW series including HCW-3, HCW-5 and HCW-8. Supplied from UK stock by LaunchCatering.
Specifications
Technical Data
| Manufacturer | Henny Penny |
| Part Number | 22648 |
| Type | Strip heater element |
| Voltage | 230V |
| Power | 1020W |
| Dimensions | Approx 648 x 76mm (25.5 x 3 inch) |
| Condition | New |
| Supplied Without | Wiring and fixings |
Part Number Cross-Reference
| Reference | Part Number |
|---|---|
| Manufacturer part number | 22648 |
| Alternative reference | HEN22648 |
| Alternative reference | 34-1893 |
Compatible Equipment Models
| Brand | Equipment Type | Model Numbers |
|---|---|---|
| Henny Penny | Warmers and Displays | CW-114, CW-216, HCW-3, HCW-5, HCW-8 |
Always verify the part number against your equipment data plate before ordering. Installation must be carried out by a suitably qualified engineer.
What Is Included
- 1 x Henny Penny 22648 strip heater 230V 1020W
Not included: wiring and fixings
Frequently Asked Questions
Will the Henny Penny 22648 fit my machine?
This part is compatible with Henny Penny CW-114, CW-216 and HCW-3, HCW-5 and HCW-8 warmers. Check the part number on your existing component or your equipment data plate, or send us your model and serial number and we will confirm the fit before you order.
What are the cross-reference part numbers?
The main reference is Henny Penny 22648. It also appears under alternative references such as HEN22648, 34-1893. If your paperwork shows any of these numbers, this is the matching part.
How do I replace this part?
Isolate the appliance from the electrical supply before any work begins. Isolate the warmer, remove the heater cover, disconnect the terminals, release the fixing screws and fit the new strip heater in reverse order. Installation must be carried out by a suitably qualified engineer.
Is this a manufacturer-specification part?
Yes. This part is supplied to the Henny Penny specification for part number 22648, matched by rating and dimensions, so it fits and performs as the component it replaces.
Is this part safe to use in commercial equipment?
Yes, when correctly installed it meets the specification required for Henny Penny chicken warmers and display units. It must be fitted by a suitably qualified engineer and the appliance tested before returning to service.
Why LaunchCatering
LaunchCatering is a trusted UK supplier of commercial catering equipment spare parts. Every listing is checked against manufacturer part numbers and compatibility data, and our parts are held in UK stock. If you are unsure whether this part fits your machine, contact us with your model and serial number and we will verify it before you order.
No technical specifications available for this product.
