Henny Penny 51279 Warmer Element Assembly 120V 1000W with Mounting Plate for HC-900 Series
Henny Penny 51279 Warmer Element Assembly 120V 1000W with Mounting Plate for HC-900 Series
Description
The Henny Penny 51279 is a coil warmer element assembly rated 120V 1000W supplied on a 4 x 6 inch mounting plate. It fits Henny Penny HC-900, HC-902, HC-903, HC-906 and HC-908 series warmers including HHC-902 and HHC-908 and HC-15. Supplied from UK stock by LaunchCatering.
Specifications
Technical Data
| Manufacturer | Henny Penny |
| Part Number | 51279 |
| Type | Warmer element assembly, coil, with mounting plate |
| Voltage | 120V |
| Power | 1000W |
| Plate Size | 4 x 6 inch (102 x 152mm) |
| Condition | New |
| Supplied Without | Wiring |
Part Number Cross-Reference
| Reference | Part Number |
|---|---|
| Manufacturer part number | 51279 |
| Alternative reference | HEN51279 |
| Alternative reference | 34-1474 |
Compatible Equipment Models
| Brand | Equipment Type | Model Numbers |
|---|---|---|
| Henny Penny | Warmers and Holding Cabinets | HC-900, HC-902, HC-903, HC-906, HC-908, HHC-902, HHC-908, HC-15 |
Always verify the part number against your equipment data plate before ordering. Installation must be carried out by a suitably qualified engineer.
What Is Included
- 1 x Henny Penny 51279 element assembly 120V 1000W with mounting plate
Not included: wiring
Frequently Asked Questions
Will the Henny Penny 51279 fit my machine?
This part is compatible with Henny Penny HC-900 series warmers, HHC-902, HHC-908 and HC-15. Check the part number on your existing component or your equipment data plate, or send us your model and serial number and we will confirm the fit before you order.
What are the cross-reference part numbers?
The main reference is Henny Penny 51279. It also appears under alternative references such as HEN51279, 34-1474. If your paperwork shows any of these numbers, this is the matching part.
How do I replace this part?
Isolate the appliance from the electrical supply before any work begins. Isolate the warmer, remove the access panel, disconnect the element leads, unbolt the mounting plate and fit the new assembly in reverse order. Installation must be carried out by a suitably qualified engineer.
Is this a manufacturer-specification part?
Yes. This part is supplied to the Henny Penny specification for part number 51279, matched by rating and dimensions, so it fits and performs as the component it replaces.
Is this part safe to use in commercial equipment?
Yes, when correctly installed it meets the specification required for Henny Penny warmers and holding cabinets. It must be fitted by a suitably qualified engineer and the appliance tested before returning to service.
Why LaunchCatering
LaunchCatering is a trusted UK supplier of commercial catering equipment spare parts. Every listing is checked against manufacturer part numbers and compatibility data, and our parts are held in UK stock. If you are unsure whether this part fits your machine, contact us with your model and serial number and we will verify it before you order.
No technical specifications available for this product.
