Product Overview

This 850mm thermocouple (part no. SIT0.200.013, SKU: LC-200-013) features an M9x1 magnet connection nut (M9x1 L13.5 s9) with S332 standard sleeve. Designed for commercial and domestic gas catering appliances, this thermocouple provides reliable pilot flame sensing and automatic gas shut-off. A direct replacement for equipment using M9x1 gas valve connections with standard S332 sleeve specification.

Technical Specifications

• Type: Standard Thermocouple — S332 Sleeve
• Part Number: SIT0.200.013
• SKU: LC-200-013
• Length: 850mm
• Thread: M9x1 (M9x1 L13.5 s9)
• Sleeve: S332 Standard
• Material: Copper tube
• Condition: New

Compatible Equipment

This part is compatible with the following commercial catering and gas equipment:

• Falcon — G1000, G3860, G3865, G3900 and Evolution series
• Blue Seal — GT60, GT61, G600 and G507 series
• Lincat — OG7, OG7001, LMR, ESLR and SLR series
• Zanussi — AG012, AG014, 200 and 700 series gas appliances
• Electrolux Professional — Thermaline and PNC 200 series
• Mareno — AF7, AF9 and FM series commercial gas ranges
• Parry — PCAO, PCAOB and MGO series gas ovens
• Fagor — 700 and 900 series commercial gas ovens and fryers
• MBM-Italia — commercial gas ovens and ranges with M9x1 fittings
• Gorenje — commercial gas equipment with M9x1 connections

Not sure if this fits your equipment? Contact us with your machine make, model and part number and we will confirm compatibility before you order.

Signs You Need To Replace This Part

• Pilot light will not stay lit after releasing the gas button
• Main burner shuts off shortly after ignition with no fault code
• Pilot flame is present but gas valve does not open
• Appliance trips out randomly during service — especially when warm

Why Buy From LaunchCatering

• UK stock — ready for fast dispatch
• Trusted by professional kitchens since 2020
• Next day delivery available
• Commercial parts specialists
• Contact us if you need help finding the right part

Installation Guidance

When replacing this thermocouple, always ensure the gas supply is isolated before starting work. Check the new thermocouple length matches or exceeds the routing distance from the pilot burner to the gas valve. The magnet connection nut should be hand-tightened then turned a quarter turn with a spanner — do not overtighten. After installation, test the pilot flame hold for a minimum of 30 seconds before returning the appliance to service. If in doubt, consult a Gas Safe registered engineer.

No technical specifications available for this product.