Brass Burner Jet Natural Gas Multi-Jet Gas Cooker Burners
Couldn't load pickup availability
Brass calibrated Natural Gas replacement jets for multi-jet gas cooker and chip range burners. Each jet is a precision-drilled brass component that meters the gas flow to a single flame port. Sizes are calibrated for mains gas; select the bore size your burner requires. Sold individually.
Specifications
Technical Data
| Product Type | Brass Burner Jet (calibrated) |
| Material | Brass |
| Gas Type | Natural Gas |
| Bore Sizes Available | 1.07mm (No-1), 0.99mm (No-2), 0.97mm (No-3), 0.91mm (No-4), 0.74mm (No-5) |
| Sold As | Individually (one jet per unit) |
| Compatible Burners | Multi-jet gas cooker burners and chip range burners |
| Condition | New |
| Supplied Without | Burner body, other jets and gas fittings |
Jet Number, Bore Size and Gas Type
| Jet Number | Bore Size | Gas Type |
|---|---|---|
| No-1 | 1.07mm | Natural Gas |
| No-2 | 0.99mm | Natural Gas |
| No-3 | 0.97mm | Natural Gas |
| No-4 | 0.91mm | Natural Gas |
| No-5 | 0.74mm | Natural Gas |
Compatible Equipment
| Equipment Type | Application | Fitment Note |
|---|---|---|
| Multi-jet cooker burner | Stock pot / wok cookers | Threaded brass jet port |
| Chip range burner | Fish and chip shops | One jet per flame port |
| Deep-pan fryer / hot plate | General commercial | Replace worn or blocked jets |
Gas Type Specification
| Gas Type | Bore Range | Note |
|---|---|---|
| Natural Gas | 0.74mm to 1.07mm | Calibrated for mains gas |
Natural Gas jets are calibrated differently from LPG jets and are not interchangeable; LPG versions are listed separately. Installation must be carried out by a Gas Safe registered engineer.
What Is Included
- 1 x Natural Gas brass burner jet in the selected bore size
Not included: the burner body, any other jets and gas fittings.
Frequently Asked Questions
Which bore size do I need?
Match the jet to your burner: read the size or number stamped on your existing jet, or check the size specified for your burner. This product covers Natural Gas bore sizes 1.07mm (No. 58), 0.99mm (No. 61), 0.97mm (No. 62), 0.91mm (No. 64), 0.74mm (No. 69).
Why are Natural Gas and LPG jets different?
The jets are drilled to different bores because Natural Gas and LPG flow and burn differently. This product is calibrated for Natural Gas; the LPG versions are listed separately and are not interchangeable.
How many jets do I need?
Jets are sold individually, so order one per port you are replacing. A full multi-jet burner may use 10 to 32 jets depending on its size, so count the ports before ordering.
Will these fit my burner?
These are standard brass jets for multi-jet gas cooker and chip range burners. Match by bore size and gas type; if your burner uses that size on Natural Gas, the jet will fit.
Is it safe to fit and who should install it?
Jets are gas components and must be fitted and commissioned by a Gas Safe registered engineer, who will set the correct pressure and check for leaks. Correctly calibrated jets give a clean, even flame.
Why LaunchCatering
LaunchCatering is a UK-based specialist in commercial catering spare parts. We hold these Natural Gas brass burner jets in UK stock and list each bore size clearly so you can order the exact jet your burner needs. If you are unsure which size to choose, send us the number or size stamped on your old jet and we will help you match it.
These are brass calibrated Natural Gas burner jets for multi-jet gas cooker and chip range burners, available in bore sizes 1.07mm (No. 58), 0.99mm (No. 61), 0.97mm (No. 62), 0.91mm (No. 64), 0.74mm (No. 69). Each jet meters gas to a single flame port and is sold individually, calibrated for mains gas. Natural Gas and LPG jets are calibrated differently and are not interchangeable. Supplied new from UK stock by LaunchCatering; fitting by a Gas Safe registered engineer is required.
No technical specifications available for this product.
Recently Viewed
Pick up where you left off
