Product Overview

The Robertshaw RX-6-36 is a millivolt-type operating thermostat for commercial gas fryers. It provides temperature control between 200F and 375F (93C to 203C) through a snap-acting hydraulic mechanism that interrupts gas flow to the burner when the set temperature is reached. Fitted with a 3/8 inch NPT stuffing gland and a 36 inch capillary, this thermostat is used in Cecilware fryer ranges among other commercial catering equipment. Cross-references include Johnstone KX-433-36, CCC E-292, Cecilware L345A and Robertshaw 2TZ6007.

Technical Specifications

• Type: Millivolt operating thermostat
• Temperature Range: 200F to 375F (93C to 203C)
• Capillary Length: 36 inches (914mm)
• Bulb: 3/8 inch x 5-3/4 inch
• Tank Gland: 3/8 inch NPT
• Cross References: Robertshaw 2TZ6007, CCC E-292, Cecilware L345A, Johnstone KX-433-36, All Points 461162
• Condition: New

Compatible Equipment

This thermostat is compatible with the following commercial catering equipment:

• Cecilware — EFP30, EFP40, EFP65, EFS30, EFS40, EFS65, FMP30, FMP40, FMP40B, FMP40BSS, FMP65, FMP403, FMS30, FMS40, FMS54, FMS65
• Valentine — various models fitted with Robertshaw millivolt controls (ref. RX-6-36)
• Star Manufacturing — 404D, 615FD, 630FD

Not sure if this fits your equipment? Contact us with your machine make, model and part number and we will confirm compatibility before you order.

Signs You Need To Replace This Part

• Fryer oil temperature fails to stabilise at the dial setting during service
• Burner cuts out before oil reaches the required cooking temperature
• Constant temperature overshoot causing oil to smoke or trigger the high-limit safety
• Thermostat bulb shows corrosion or damage, or capillary is kinked

Installation Notes

Drain and cool the Cecilware or Valentine fryer fully before starting work. Note wire positions before disconnecting the existing millivolt thermostat. Unscrew the 3/8 inch NPT stuffing box and withdraw the bulb from the oil tank. Install the RX-6-36 bulb through the gland and route the 36 inch capillary without sharp bends, allowing a small service loop. Tighten the stuffing box fully and reconnect the wiring. Test for oil leaks with the burner off before returning to full service. A Gas Safe registered engineer should carry out all commercial gas appliance repairs.

Why Buy From LaunchCatering

• UK stock - ready for fast dispatch
• Trusted by professional kitchens since 2020
• Next day delivery available
• Commercial parts specialists
• Contact us if you need help finding the right part

No technical specifications available for this product.