Magnet Unit 37mm for Smeg 812750026 Gas Hob Cooker Thermocouple FFD - RIC0001992
Couldn't load pickup availability
Replacement thermo-electric magnet unit for the gas tap flame failure device on Smeg gas cookers, hobs, grills and pot stoves, and on Colged, Elettrobar and MBM catering equipment using the same tap. 37 mm long, 12.5 mm head, 8.5 mm seat, 7.5 mm thermocouple pin.
Specifications
| Total length | 37 mm |
| Junction head diameter | 12.5 mm |
| Valve seat gasket diameter | 8.5 mm |
| Thermocouple connection | 7.5 mm push pin |
Suitable for
Smeg BQ60/BQ90 grills; Smeg A1, A2, A3, A4 Opera ranges; Smeg CB, CS, CX, SCB, SCD, SCE, SNL, SUK, SX, W and WB series cookers; Smeg HB96, PS19X, PVA96, PVD pot stoves (400+ models); Colged, Elettrobar and MBM appliances using the same tap.
Replaces part numbers
- Smeg 812750026
- EPMS 812750026
- Colged RIC0001992
- Elettrobar RIC0001992
- MBM RIC0001992
- Sirgas 00389
How it works
The thermocouple's millivolt output energises the magnet coil and holds the gas path open. If the flame is lost the coil de-energises and the spring closes the valve within seconds. Match the length, head diameter, seat diameter and thermocouple connection to your original before ordering. Fit by a Gas Safe registered engineer and leak-test after installation.
No technical specifications available for this product.
Recently Viewed
Pick up where you left off
